数控液压剪板机 金属材料剪切

composition of the line:recoiler 、staightener unit、feeder、swing unit、mechanical press、stacking system、hydraulic system、electric control system、etc.

二、技术特点（technical characteristics）：

1、减少工序：因为本线能冲压条带的整个宽度，避免了一些作业工序，例如来料分切或定尺剪切，这些作业常运用于圆片生产增加了生产额成本和损伤卷料表面的可能。

reduce working procedure:since it can be blanked the whole width of the strip、this is possible to reduce working procedure,such as slitting the coil or cutting to length,which are usually applied in the disk production and represent both further costs and the possibility of damaging the coil surface.

2、减少废料：充分利用卷料的宽度，采用高精密伺服电机驱动系统控制，使圆片间距和圆片到料边的距离减少到Zui小，从而减小废料量。

scrap reduction :to use the whole width of the coil、reducing to the minimum the distances between disc to disc to the strip edges、with a consequment、reduction of the scrap .

3、产量高：生产速度可达每分钟40-90片。

high output:work speed can reach 40-90spm.

4、高灵活性：当转换生产规格（直径）时。所有受安装时间影响的组成部分，例如：换模单元，码料单元和开卷机，都经过精心设计，以达到把上述时间减小到Zui小的目的。另外，可以生产圆片的直径范围从90mm到660mm。

flexiblity:when changing the production size(diameter).all the components affected by the set up times、suchs as:thedie change unit、the stacking unit and the decoiler、have been designed with the purpose of reducing these times at the minimum.without any change or modification.besides、the diameters range from 90mm to max.of 660mm.

5、应用范围广：同一条线既可以冲压不锈钢片、硅钢片，也可以冲压铝片，不需要做任何转换和修改。

wide production range:the same line can blank aluminium and stainless steel.

6、高品质：六重式校平机，高刚性的机械压力机，先进的自动码垛系统等，保证了产品的高质量。

high :six layeres type staightener、high rigid mechanical press、advanced stack system、etc，ensure the high .

三、主要技术参数